What is the socket size of a scaffold wrench?
7/8 socket
scaffold ratchet wrench with a 7/8 socket and 1/2 drive, open 7/8 wrench,multitool.
What size spanner do you need for scaffolding?
7/16W equates to about 21mm nut. This is the standard size for scaffolding nuts, or at least the scaffolding I have.
What is a scaffolding ratchet?
The Scaffolding Ratchet (part number BS-63B) is three tools in one – tools that erectors need for easily and quickly engaging the posts, fasteners, and clamps on scaffolding. Since most scaffolding uses 7/8” hex nuts, the ratchet comes with a 1/2” drive pinned 7/8” six-point socket.
What size is a 7/16 spanner?
5/8 INCH
Imperial and Metric Spanner Sizes
| BOLT DIAMETER (INCHES) | AF SPANNER SIZE (INCHES) | SPANNER SIZE (MM) |
|---|---|---|
| 7/16 INCH | 5/8 INCH | 15.88 MM |
| 11/16 INCH | 17.46 MM | |
| 1/2 INCH | 3/4 INCH | 19.05 MM |
| 9/16 INCH | 7/8 INCH | 22.22 MM |
What is a scaffold spanner used for?
A scaffold wrench or spanner is a hand tool used for tightening and loosening fasteners used in the construction of scaffolding or staging. It is as the name describes a wrench that is in most cases 7/8-ths in size in the United States.
What is a podger bar?
A podger spanner, or podger, is a tool in the form of a short bar, usually tapered and often incorporating a wrench at one end.
What mm is 11/16 socket?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 17mm | 0.669 | |
| 11/16″ | 0.688 | |
| 18mm | 0.709 | |
| 23/32″ | 0.719 |
What drill do scaffolders use?
The impact drill is the modern tool to erect scaffolding instead of using spanners. The Makita drill is quick to use and speeds up your everyday job making scaffold erection much faster.
What is a podger ratchet?
A podger is a tool that features a wrench on one end and a tapered spike or point on the other. Extremely popular with scaffolding and event staging the podger is a must have tool as it allows you to quickly and effortlessly assemble and disassemble scaffolding with ease.
What are slogging spanners?
A slogging spanner has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. Slogging spanners are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.
What size Ratchet do I need for scaffolding?
1 United States: 7/8″ and 3/4″ (19 x 22 mm) 2 Most common Scaffold Ratchet (US): 19/21 mm 3 In the UK: 7/16” Whitworth (21 mm) and 1/2″ Whitworth (23 mm) 4 Australian Scaffolding: 1/2″ Whitworth (24 mm) 5 Layher fitting: 22 mm
What is a ratchet scaffold wrench?
This is a variation of the scaffold wrench that is designed with a ratchet mechanism for quicker tightening or loosening of nuts and bolts. It is basically the same as a scaffold wrench, but the ratcheting allows you to tighten or loosen without having to remove and replace the wrench itself thanks to the ratchet.
What size scaffold wrench do I Need?
In the United States, the most commonly used scaffold wrench size is 7/8-inch and ratchet size is 19/21 mm. The wrench or ratchet size is country specific and also depends on the manufacturer of the fittings. The most common standard sizes are as follows.
What is the standard size of a ratchet?
The wrench or ratchet size is country specific and also depends on the manufacturer of the fittings. The most common standard sizes are as follows. United States: 7/8″ and 3/4″ (19 x 22 mm) Most common Scaffold Ratchet (US): 19/21 mm