What is unified ports in UCS?
Unified ports are ports on the 6200 series fabric interconnect that can be configured to carry either Ethernet or Fibre Channel traffic. These ports are not reserved. They cannot be used by a Cisco UCS domain until you configure them.
What is the default FC mode in UCS?
The default switching mode is end-host mode where UCS appears as a number of hosts attached to the upstream switch.
What is the maximum number of VLANs supported in UCS?
200 N/A 200 200 MaximumsecondaryVLANs per primary VLANs.
What is UCS networking?
A unified computing system (UCS) is is a converged data center architecture that integrates computing, networking and storage resources to increase efficiency and enable centralized management. UCS products are designed and configured to work together effectively.
What is Intersight managed mode?
Cisco Intersight™ is a management platform delivered as a service with embedded analytics for your Cisco and 3rd party IT infrastructure. Intersight Managed Mode (IMM) is a new architecture that manages the UCS Fabric Interconnected systems through a Redfish-based standard model.
What is End Host Mode?
The end-host mode is the default mode of operation for UCS Fabric Interconnect Ethernet connectivity. In this mode, UCS Fabric Interconnect is presented to the northbound LAN switch as an end host with many adapters. STP is not configured on the uplink switch ports.
Is VLAN 1 Native VLAN?
By default, Native VLAN is VLAN 1, but it can be changed to any VLAN. Traffic will be sent when both Default and Native VLAN are the same. Traffic can be sent irrespective of Default and Native VLAN being the same or different. Default VLAN is specified through the VLAN operand command.
What are the different kinds of UCS servers available?
Computing Systems
- Hyperconverged infrastructure.
- Converged infrastructure.
- Servers.
How do you failover UCS Fabric Interconnect?
You must force the failover from the primary fabric interconnect….Procedure.
| Command or Action | Purpose | |
|---|---|---|
| Step 1 | UCS-A# show cluster state | Displays the state of fabric interconnects in the cluster and whether the cluser is HA ready. |
| Step 2 | UCS-A# connect local-mgmt | Enters local management mode for the cluster. |
How do I access Cisco UCS?
Step 1 In your web browser, type the Cisco UCS Central GUI web link or select the book mark in your browser. Step 2 On the launch page, do the following: a) Enter your user name and password. b) Click Log In. After you have completed your tasks on the Cisco UCS Central GUI, click Log Out on the upper right corner.
How do I update UCS infrastructure firmware?
To upgrade the Cisco UCS Infrastructure Firmware, perform the following: Select the Equipment tab and then select the Firmware Management tab. From the Firmware Management tab, select the Firmware Auto Install tab. Select Install Infrastructure Firmware Upgrade.
How do I add UCS to Intersight?
Target Claim in Intersight Managed Mode
- From the Targets table view, click Claim a New Target > Cisco UCS Domain (Intersight Managed). Click Start.
- Enter the following details to complete the target claim:
- Resource Groups—Select the Resource Group from the list to add it to the Organization.
- Click Claim.
What Intersight assist?
Cisco Intersight Assist helps you add endpoint devices to Cisco Intersight. A datacenter could have multiple devices that do not connect directly with Cisco Intersight. Any device that is supported by Cisco Intersight but does not connect directly with it, will need a connection mechanism.