Why does my Fisher and Paykel washing machine keep going out of balance?
Too much water for the load Ensure an appropriate water level is selected for the load size (or select ‘Auto’ water level). Selecting a water level that is too high can cause out of balance loads, tangling or splash-over. Try selecting a water level suitable for the load size.
Why isn’t my washing machine spinning?
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
How do I reset my Fisher Paykel error code?
Reset Procedures for the Fisher & Paykel Dishwasher
- Press and hold the button decorated with the key and lock image for five seconds.
- Press the power button to turn off power to the Fisher & Paykel dishwasher.
- Wait a few minutes and then press the power button to restore power.
How do you fix an out of balance washing machine?
Level the Machine A carpeted surface can throw this balance off. If your washer is located on a pedestal, the problem can be amplified. Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor.
Why is the spin cycle not working?
If the spin cycle doesn’t work, the belt may be loose or broken. Tighten or replace the belt. 2. Check the lid switch and the tab on the lid that strikes it.
How do I reset my Fisher Paykel washing machine?
You can reset your washer to the default settings it left the factory with:
- Turn the dial to select ‘Spin’.
- Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds.
- Your washer will now be reset to the default settings.
Why is my washing machine not draining?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.