What is the width of a Ford Explorer 8.8 rear end?
7] From the factory, 8.8s use 1330- or 1310-series U-joints. This is the companion flange where the yoke bolts. The 1330 has a 3316-inch width for the U-joint, and the 1310 has a 358-inch width. The 1330 is usually found in Ford trucks.
What is the width of a Ford 9-inch rear end?
The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis.
What gear ratios are available for a Ford 8 inch rear end?
The Ford 8 inch axle is a smaller version of the popular Ford 9 inch axle, just with an 8 in ring gear diameter, removable pinion support, and typically 28 spline axle shafts. Original gear ratios range between 2.79:1 and 5.43:1, and aftermarket replacement gears are available for many ratios as well.
How wide is a fox body 8.8 rear end?
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.
| Vehicle Application | Axle Width (inches) |
|---|---|
| ’65-’66 Mustang | 57 11/44 |
| ’67-’70 Mustang 8.0 | 59 51/48 |
| ’71-’73 Mustang | 61 11/44 |
| ’67-’71 Comet, Cougar | 59 11/44 |
How wide is a G body rear end?
58 inches
Products specifications
| Vehicle Fitment | 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons) |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
How do you measure a Ford 8.8 axle?
Examples of this is GM 12 Bolt, Mopar 9 1/4, Ford 8.8, etc… This should be measured with a tape measure by hooking the outside of the axle flange (wheel side-where the wheel studs are) and pulling back to the end of the C-Clip Button.
How wide is a Fox body rear end?
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.
| Vehicle Application | Axle Width (inches) |
|---|---|
| FORD | |
| ’65-’66 Mustang | 57 11/44 |
| ’67-’70 Mustang 8.0 | 59 51/48 |
| ’71-’73 Mustang | 61 11/44 |
What’s the best rear end for G body?
Fox-body rear
Unless you plan to cut and narrow the rear, the Fox-body rear is by far the best choice of the bunch, since it is the closest to the factory G-body width (57.25-inches). Though the Ranger rearend is the same width and comes with 5-lug axles, as well as 3.73:1 or 4.11:1 gears, you will want to steer clear.
How wide is a Mustang rear end?
What gear ratio does Mustang GT have?
The majority of Mustangs come with a ratio of 2.73-3.31 from the factory.
What is the rear end width of a Ford Mustang?
Home > Specs > Rear End Widths Representative for comparison purposes only Ford Outside Width Year Model 56.50 1969-1977 Maverick 8″ 56.50 1990-1992 Ford Ranger 8.8″ 56.75 1995-2003 Ford Explorer 8.8″ Narrowed w/2 short side axles 57.00 1974-1978 Mustang II 8″ 57.25 1957-1959 Ford, Ranchero, Station Wagon 57.25 1965-1966 Mustang 58.00
What is the rear end width of a Ford Ranger?
Home > Specs > Rear End Widths Representative for comparison purposes only Ford Outside Width Year Model 56.50 1969-1977 Maverick 8″ 56.50 1990-1992 Ford Ranger 8.8″ 56.75 1995-2003 Ford Explorer 8.8″ Narrowed w/2 short side axles 57.00 1974-1978 Mustang II 8″ 57.25 1957-1959 Ford, Ranchero, Station Wagon 57.25
What is a 9 inch rear end?
Centers Let’s start with the 9″ First off, the 9” is a removable carrier type rear end, it shares this design in common with its baby brother the 8”, while the 6 ¾”, 7 ¼’, 7.7”, 8.8” and Dana rears also used in Fords are integral carrier types.
What years did Ford make the 8 inch rims?
1990-1992 Ford Ranger 8.8″ 56.75 1995-2003 Ford Explorer 8.8″ Narrowed w/2 short side axles 57.00 1974-1978 Mustang II 8″ 57.25 1957-1959 Ford, Ranchero, Station Wagon 57.25 1965-1966 Mustang 58.00 1966-1977 Bronco 58.00 1964-1965 Falcon 58.00 1977-1981 Granada/Versailles 58.50 1977-1981 Versailles 58.50 1993-2009 Ford Ranger 8.8″ 59.25 1967-1970