How many amps does an MSD 6AL draw?
The MSD uses about . 9 Amps for every 1,000 rpm.
What does a MSD 6AL 2 do?
MSD is excited to announce the next generation of 6-Series ignition controls – the 6AL-2! The ignition control combines a new housing, new digital controls, and more power in a sleek package….Features:
| Brand | MSD |
|---|---|
| Current Draw | .7 Amp per 1,000 RPM |
| Emission Code | 1 |
| Features | Rev Limiter |
| Primary Voltage | 535 Volts |
How many amps does an MSD Blaster 2 coil?
Description
| Coil Specs | |
|---|---|
| Turns ratio: | 100:1 |
| Inductance: | 8 mH |
| Maximum voltage: | 45,000 Volts |
| Peak current: | 140 mA |
What does MSD Ignition do?
At lower rpms an MSD Ignition fires your spark plugs multiple times during each cycle, rather than just once like most OEM ignitions do. But that’s not the only thing going on. Unlike stock-inductive type ignition systems, MSD ignitions incorporate capacitive discharge technology.
How many amps does an ignition system use?
Ignition System (primary circuit) – 6 to 20 amps.
Does MSD Ignition need vacuum advance?
The MSD distributors come with the B26 vacuum advance control unit. This pulls in full vacuum at 13 inches of manifold vacuum. If your engine is pulling 15 inches or better (numerically higher) in neutral (or “drive”, if auto), you’re fine running manifold vacuum. In fact, it’s recommended.
Can I run an MSD distributor without the box?
MSD 8360 is a “ready to run” distributor and doesn’t need a box. MSD 8361 is a distributor with a magnetic pickup only and it must be run with a box. 8361 will only have 2 wires, + and – for the magnetic trigger.
What is the 6al-2 ignition control?
MSD is excited to announce the next generation of 6-Series ignition controls – the 6AL-2! The ignition control combines a new housing, new digital controls, and more power in a sleek package.
What is a 6AL 2?
MSD Digital Programmable 6AL-2 The Programmable 6AL-2 lets you lock out the distributor and program a timing curve via a PC. You’ll also be able to set a 2-Step Rev Limiter, a retard for use with nitrous and even a boost timing curve for forced induction engines!
How does a 6al-2 engine work?
The multiple sparks of the 6AL-2 burn in the cylinder for 20 degrees of crankshaft rotation to ensure complete combustion. Two more great features are the rev limits!
What is the spark output of a 6al-2?
The spark output of the new box has been turned up to 535 volts of primary voltage with spark energy reaching up to 135 millijoules! The multiple sparks of the 6AL-2 burn in the cylinder for 20 degrees of crankshaft rotation to ensure complete combustion.