Is the MXL 990 good for voice over?
The MXL 990 has a frequency response from 30Hz – 20kHz. That makes it ideal for recording vocals and acoustic instruments.
Does the MXL 990 need a pop filter?
About MXL 990 Complete Bundle balanced XLR cable. This Shockmount is designed for the MXL 770 and 990 microphone (sold separately). It can be used to eliminate vibrations and prevent vocal plosives during recording applications. It protects the mic from corrosive moisture and features Built-In Metal Pop Filter.
Are MXL mics any good?
Conclusion. The MXL 990 is a fine balance of quality and affordability. It receives generally favorable reviews from professional and hobbyist users alike, and in no way sounds worse than any similarly-priced mics in its range.
Why is the Rode NT1-A so good?
The Rode NT1-A is a best-seller for a reason. Everything from its cardioid recording pattern and flat response to its high sensitivity and low self-noise makes it a perfect pick for a quiet studio.
What is an MXL 990 good for?
The MXL 990 can be a solid choice when recording guitars, whether as a close mic or as a room mic. While it might not be able to capture the lows as well with its 30 Hz drop-off, it can be a solid choice when trying to add some brightness and depth in conjunction with another microphone or two.
Should I buy Rode NT1-A?
Should you buy the Rode NT1-A? The Rode NT1-A is a best-seller for a reason. Everything from its cardioid recording pattern and flat response to its high sensitivity and low self-noise makes it a perfect pick for a quiet studio.
Does the MXL 990 need phantom power?
Phantom Powered As a condenser mic with a FET preamp, the MXL 990 requires phantom power to operate in any environment. So, it should be connected via an XLR cable (available separately) to a mixing board, a microphone preamp, or an audio interface that can send +48V phantom power.
Should I get the NT1 or nt1a?
Pound for pound, the NT1 is objectively the better microphone. It might not be able to handle the same SPL levels as the NT1A, but 132dB SPL is still way more than you’ll ever need, and with a more natural, transparent response, and lower self-noise, the NT1 is a better option for most studio applications.