How do I set up Fox 34 forks?
Setting Fork Air Pressure
- Unscrew the air cap on top of the left fork leg counter-clockwise to expose the Schrader valve.
- Attach a FOX High Pressure Pump to the Schrader valve.
- Pump your fork to the appropriate pressure as listed in the ‘Suggested starting points for setting sag’ table below, then remove the pump.
What psi is Fox 34?
34 TALAS maximum air pressure is 200 psi. The recommended settings in this tuning guide are designed to be a starting point, in order to get you out on your first ride in as few steps as possible.
How many volume spacers does Fox 34 have?
Fox 34 FLOAT
| Travel | *Max Volume Spacers |
|---|---|
| 140 mm | 5 |
| 130 mm | 5 |
| 120 mm | 6 |
How much travel does a Fox 34 have?
between 100mm and 140mm
Fox’s brand-new 2022 34 and 34 Step-Cast (SC) forks receive a host of updates to make them lighter and stiffer with a focus on trail, downcountry and cross-country riding, with between 100mm and 140mm of travel.
What psi should I set my rear shock?
The exact PSI you end up with depends on how plush/firm you want the rear shock to be, but a good starting point is 1 psi for 1 lbs in weight of the rider (including riding gear).
How do you adjust a rebound Fox 34?
The rebound adjustment is dependent on the air pressure setting. For example, higher air pressures require lower rebound settings. Use your air pressure to find your rebound setting. Turn your rebound knob to the closed position (full clockwise) until it stops.
Do volume spacers affect sag?
In a few words, if you’re bottoming out frequently, but your sag is correctly set, add a volume spacer to reduce air chamber volume and increase the rate of progression in your suspension. Reducing volume makes your suspension firmer sooner in the travel, increasing the spring rate in the mid and end-stroke.
What is the maximum air pressure on a 34 float Fork?
Setting Fork Air Pressure. 34 FLOAT maximum air pressure is 110psi. Unscrew the blue air cap on top of the left fork leg counter-clockwise to expose the schrader valve. Attach a FOX High Pressure Pump to the schrader valve.
How do I adjust the SAG on my Fox Racing Shox?
Generally, sag should be set to 15 – 25% of total fork travel. Unscrew the blue aircap on top of the left fork leg to expose the Schrader valve. Attach a FOX Racing Shox High Pressure Pump to the Schrader valve. Pump your fork to the appropriate setting from the Suggested Air Spring Pressure Settings table below, then remove the pump.
How do you set the air pressure on a Fox high pressure?
Therefore, the air pressure is generally not set by obtaining proper sag, but is intended to be set for proper riding feel and bottom out control. Unscrew the blue air cap on top of the left fork leg counter-clockwise to expose the schrader valve. Attach a FOX High Pressure Pump to the schrader valve.
What are the specs of a fit 34 CTD?
34 Factory FIT CTD w/Adj; 130, 140, 150, 160; Kashima Coated or anodized upper tubes, 1.5” tapered steerer, lever actuated Climb/Trail/Descend (3 position), Trail adjust range (1-7), rebound, air spring pressure.