How do I reset my GOtv E16?

How do I reset my GOtv E16?

Use official GOtv web site to get rid of E16 error Search for “Clear Error Code” on the right side of the page. After you’ve found it, enter your IUC Number. Finally, select your problem type (E16 error) and write down the code which will pop up on a display. Click “Clear Code”.

What does E48 32 mean on GOtv?

Whenever you see an E48-32 error on your Gotv, it means that your signal strength is low or your Gotv does not receive any antenna from your antenna. When your Gotv antenna cable breaks, the signal will cut off, and you will see an e48-32 error on your screen.

How do you clear e32 error on GOtv?

Another way:

  1. Open your internet browser and visit GOTV page here.
  2. Click on Easy self service.
  3. Click on Clear Error Code.
  4. Type on your IUC number and select GOTVE16, you may be required to type in a Captcha code for verification.
  5. Enter Captcha code and click on Clear Error.
  6. Viola! Error is gone.

What happens when GOtv is reset?

Resetting a Gotv decode is how a Gotv decoder has been restored to factory default. After you have your reset decoder every data will be wiped out and you must rescan your channels to keep watching the programs.

How do I reset my GOtv decoder without remote?

Using GOtv without remote Power button – You can use it to power on or switch off your decoder. The button also allows you to reset the device. V+ – It is the volume up button. V- – It is the volume down button.

How do I fix error E48 32?

DStv No Signal Problem (E48-32 Error) – How to fix step by step

  1. Why your DStv says no signal?
  2. Step 1: Check your DStv connection cables.
  3. Step 2: Reboot your decoder.
  4. Step 3: Inspect your DStv satellite dish.
  5. Step 4: Check your LNB.
  6. Step 5: Call the approved DStv installer.

How do I fix my GOtv error code?

To clear GoTV error code using text message system, send RESET *IUC number* to 4688. For example; RESET 7235547899 to 4688.

How do I reactivate my GOTV?

Steps

  1. On your internet-enabled device, visit eazy.gotvafrica.com.
  2. Login your account, using your account number and surname.
  3. On GoTV’s website, click the dialogue box ”clear your error”
  4. Click E16 error.
  5. Click on reset device to reset and activate GoTV.

How do I reset my Gotv decoder without remote?

What happens if you reset your GOTV?

Why is my Gotv not getting signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

How do I fix E16 4 service is currently scrambled?

Remove the smart card and clear the chip end of the card with a neat dry cloth. Re-insert the card and switch on the Television. Call your local service provider or customer care. Ask your service provider to refresh the account.

What is E16 error on GOtv?

E16 /E30 means your decoder has been disconnected. Please ensure your decoder is switched on before paying your subscription.

How do I activate my GOtv after payment in Kenya?

How to activate GOTV after payment in Kenya?

  1. Type on your phone the following combination of digits and symbols – *423# on any network.
  2. In a couple of seconds you will get a respond from GOTV with text “Assistance from Customer Care”.

What happens when you reset your GOtv?

Why is my decoder showing no signal?

Your decoder can also lose its signal when there is bad weather. Since it interferes with the signal quality of your satellite dish, you may lose the signal completely. If there is a strong wind, your satellite can also get misaligned, and you could lose signal reception.

How do I Reset my GOtv decoder?

There are three ways to reset your GOTV decoder. You can reset it by using mobile SMS, USSD code, or you can choose to do it online. Send an SMS that looks like this; Reset * your IUC number * and send to 4688. The IUC number refers to your Identification User Code. It is the serial number of your decoder.

How to reset GOTV account after payment?

All you need to do is Send “reset Your GOTV account number to this number, 4688 . Quite easy right. Now lets head to other methods. This is another very easy method to reset your GOTV after payment as all you need is internet access. This means that once you have internet access, resetting your GOTV is just as easy as ABC.

What is the customer care number for GOTV?

The customer care number is 08039044688. If you have read this and have any question troubling you concerning GOTV, don’t hesitate to drop all of them in the comment box below. That’s the much I can take on the topic “ How To Reset GOTV | Ask Any Questions Here | eazy.gotvafrica.com/en/ng/ “

How do I Reset my Eazy GOTV account?

You can also reset by visiting your Eazy GOTV account. Select your country then login using your IUC number and your surname/mobile number of the person who registered and the IUC number. Click on Clear error and select the displayed error and then click on clear.

Advice